Спосіб оцінки впливу контурів вишитого елемента на фізико-механічні властивості тканини

СПОСІБ ОЦІНКИ ВПЛИВУ КОНТУРІВ ВИШИТОГО ЕЛЕМЕНТА НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТКАНИНИ

METHOD OF ESTIMATING THE EFFECT OF CONTOURS EMBROIDERED ELEMENT ON PHYSICAL AND MECHANICAL PROPERTIES OF FABRICS

 Сторінки: 196-200. Номер: №5, 2021 (301)
 Автори:
РІПКА Г.А.
Східноукраїнський національний університет імені Володимира Даля
ORCID ID: https://orcid.org/0000-0003-0172-867X
e-mail: Textiles.snu@gmail.com
ЗАСОРНОВА I.О.
Хмельницький національний університет
ORCID ID: https://orcid.org/0000-0001-6655-5023
e-mail: izasornova@gmail.com
RIPKA GALYNA A.
Volodymyr Dahl East Ukrainian National University, Severodonetsk, Ukraine
ZASORNOVA IRYNA O.
Khmelnytskyi National University, Ukraine
DOI: https://www.doi.org/10.31891/2307-5732-2021-301-5-196-200
Рецензія/Peer review : 23.09.2021р.
Надрукована/Printed : 10.10.2021 р.

Анотація мовою оригіналу

 В статті розглянуто питання поліпшення якості нанесення вишитого елемента на текстильний матеріал з метою підвищення конкурентоспроможності швейних виробів на вітчизняному ринку товарів та послуг. Встановлено, що під час машинного вишивання найбільш руйнівною є границя системи «тканина – вишивка». Запропоновано обирати хвилеподібний контур вишитого елемента.
Ключові слова: комп’ютерна вишивка, руйнування текстильного матеріалу, контур рисунка, якість вишивки.

Розширена анотація англійською мовою

Computer embroidery is one of the modern types of garment decoration. But in our country this industry is insufficiently studied. Instead, today there are entire associations of embroidery companies abroad, periodicals are published, special schools operate, international conferences are held, and Internet conferences on computer embroidery are organized. The article discusses the issues of improving the quality of applying an embroidered element to a textile material in order to increase the competitiveness of garments in the domestic market of goods and services. It was found that during machine embroidery, the most vulnerable point is the border of the “fabric-embroidery” system. If the embroidered pattern along the contours of the edge is characterized as a “straight line”, then the maximum value of the destruction of the samples at the warp occurs with tatami stitches, and weft with tatami stitches and zigzag. When the pattern is embroidered in the form of a circle, the destruction already occurs not only along the perimeter of the “arc line”, but also in the middle. If the embroidered pattern is a rectangle with wavy edges, in contrast to the straight and arc border lines in the system “fabric-embroidery”, the process of destruction occurs within, starting from the upper and then the lower contours. There is also a decrease in rupture characteristics at (S), (Z), and (T) –stitches. When studying the effect of embroidery needles on the physical and mechanical characteristics of textile materials, it was experimentally established that this process should be attributed to the destructive, the degree of which depends on their number, as well as the step and type of stitches. This is evidenced by the increase in the values of the coefficient of air permeability of the samples of materials and the decrease in the breaking indicators in comparison with the initial values. Thus, the research and their analysis shows that the degree of change in rupture characteristics, as a control indicator, primarily depends on the contour of the edge of the pattern, as well as the type of computer embroidery weave, but the greatest influence of these factors occurs when the geometry of the system boundary ” fabric-embroidery “is a straight line, and the smallest – a wavy line that does not contradict the mathematical model, the conclusions of which were used in the design of the embroidered element for children’s clothing (pants).
Keywords: computer embroidery, destruction of textile material, contour pattern, quality of embroidery.

References

1. Riabchykov M.L. Rozrakhunok ta konstruiuvannia mashyn lehkoi promyslovosti / M.L. Riabchykov, I.H. Deineka. – L. : SNU im. Dalia, 2010. – 264 s.
2. Materialy z saitu TOV «Epsima, NVP», m. Zhytomyr [Elektronnyi resurs]. – Rezhym dostupu : http: // epsima.com.
3. Ripka H.A. Obgruntuvannia kryteriiv otsinky ruinuvannia zrazkiv materialu vyshyvalnymy holkamy / H.A. Ripka, Ye.O. Mazniev, A.A. Mychko // Tekhnolohycheskyi audyt y rezervы proyzvodstva. – 2015. – № 2/4(22). – S. 39–44.
4. Patent 98638 Ukrainy, MPK G 01N 15/08(2006.01). Sposib vyznachennia stupenia ruinuvannia tekstylnoho materialu (okrim netkanykh i trykotazhnykh poloten) mashynnoiu holkoiu / Mychko A.A., Deineka I.H., Ripka H.A., Mazniev Ye.O. ; zaiavnyk i patentovlasnyk Skhidnoukrainskyi natsionalnyi universytet imeni Volodymyra Dalia № u2014 03509 ; zaiavl. 07.04.2014 ; opubl. 12.05.2015. biul. № 9, 4 s.
5. Wael A. Hashima. The mechanical vibrations of the sewing machines needle. Rart 2: the free longitudinal vibrations. Vlakna & Textil. Volume 27(4). 2020. rr. 17–25.
6. Tihomirov V.L. Graficheskij redaktor vyshivok GR3. Rukovodstvo polzovatelya vyshivalnogo avtomata «Lika-5» / V.L. Tihomirov. – K. : SisTeh, 2002. – 60 s.
7. Proskurnin Yu.I. Programmnyj kompleks dlya sozdaniya i redaktirovaniya dizajnov mashinnoj vyshivki “Urfinus-professional”. Rukovodstvo polzovatelya po upravleniyu vyshivalnymi mashinami Happy i Velles. – Sergiev Posad : OOO «Dzhussoft», 2012. – 177 s.
8. Kozhnina G.S. Lazer prihodit v mir vyshivki / G.S. Kozhnina // Shvejnaya promyshlennost. – 2006. – № 2. – S. 50-51.
9. Materialy z saitu TOV «Epsima, NVP», m. Zhytomyr [Elektronnyi resurs]. – Rezhym dostupu : http://epsima.com
10. Zasornova I.O. Рractical usage of program module “VISHIVANKA” for filling some part of embroidery ornament with double cruciform elements / І.О. Zasornova // Tendencies and innovations the textile and fashion industry, 8–10 November, 2018. – Plovdiv, Bulgaria. – Р. 273–277.
11. Slavinskaya А. Сapsulal approach to celebrity of ethnic embroidery in formation of modern wardrobe / А. Slavinskaya, О. Syrotenko, І. Zasornova, О. Zasornov // Vlakna & Textil. – 2019. – Volume 26(4). – Р. 69–83.
12. Artemenko А. Costume Designin for hospitality establishments staff on the basis of analysis the Slavic Snakes ornamentation / А. Artemenko, О. Yakymchuk, D. Yakymchuk, N. Myrhorodska, I. Zasornova // Vlakna & Textil.– 2018. – Volume 25(1). – Р. 3–7.
13. Amal Abdullah Albishri. Influences of the operating parameters of embroidery stitches on electrical properties of the conductive threads / Amal Abdullah Albishri, Emad El-Din Sayed Gohar and Marwa Mohamed Tharwat // Vlakna & Textil. – 2018. – Volume 28(3). – Р. 3–19.
14. Chuprina N.V. Formation of fashion system in the XX – the beginning of the XXI century / N.V. Chuprina, T.F. Krotova, K.L. Pashkevich, T.V. Kara-Vasylieva, M.V. Kolosnichenko // Vlakna a textile. – 2020. – Volume 27(4). – Р. 48–57.
15. Pashkevych K.L. Modern directions of eco-design in the fashion industry / K.L. Pashkevych, K. Khyrana, O.V. Kolosnichenko, T.F. Krotova, A.M. Veklich // Art & Design. – 2019. – No 4(08). – Р. 9–20..
16. Materialy tekstilnye. Tkani i shtuchnye izdeliya. Metody opredeleniya razryvnyh harakteristik pri rastyazhenii : GOST 3813-72 (ISO 5081-77, ISO 5082-82). – [Dejstvuyushij s 1973-01-01]. – M. : IPK Izdatelstvo standartov, 2002. – 20 s. – (Mezhgosudarstvennyj standart).