До розрахунку навантаженості в’язальних голок шкарпеткових автоматів

ДО РОЗРАХУНКУ НАВАНТАЖЕНОСТІ В’ЯЗАЛЬНИХ ГОЛОК ШКАРПЕТКОВИХ АВТОМАТІВ

TO CALCULATE THE LOADING OF KNITTING NEEDLES OF AUTOMATIC HALF-HOSE MACHINES

Сторінки: 131-135. Номер: №4, 2021 (299)
Автори:
Л. М. БЕРЕЗІН
Київський національний університет технологій та дизайну
ORCID ID: 0000-0002-2672-6323
e-mail: lnb07@ ukr.net
BEREZIN Leonid M.
Kyiv National University of Technologies and Design
DOI: https://www.doi.org/10.31891/2307-5732-2021-299-4-131-135
Рецензія/Peer review : 08.08.2021 р.
Надрукована/Printed : 26.08.2021 р.

Анотація мовою оригіналу

В роботі наведено результати досліджень впливу швидкісних режимів шкарпеткових автоматів на навантаженість в’язальних голок за сумарним числом циклів навантажень. Встановлені залежності колових швидкостей голкового циліндру, за яких можливий розрив силового замикання п’яток голок при ударі з клином та додаткова взаємодія п’яток невідібраних голок з горизонтальними обмежувальними клинами.
Ключові слова: шкарпетковий автомат, в’язальна голка, навантаженість, удар, цикл навантаження.

Розширена анотація англійською мовою

An important link in the analysis of the longevity of details by the criterion of fatigue strength is the calculation of parameters that take into account the peculiarities of the technological regime in terms of load and the corresponding number of cycles that affect the accumulation of fatigue failure. The final range of loads of knitting needles of automatic half-hose machine was based on the systematization of amplitudes of forces depending on the frequency of their implementation. Previous works has assumed the assumption of a one interaction of the needle heel with the cams, which is experimentally refuted by the example of modern high-speed automatic half-hose machine.
The aim of the work is to adjust the provisions of calculating the load of knitting needles of half-hose machines for design estimate of longevity, taking into account the specific features of the impacts of needles with the cams of the knitting system, which affect the total number of load cycles.
The condition of rupture of the contact in the pair of the needle heel and the inclined cam after their impact is considered, taking into account the inertial and rigid parameters of the system, including the resisting force of the needle in the groove of the cylinder. According to the results of the dynamic analysis, the expressions of the minimum speed at which the needle can rebound from the cam and the vertical component of the needle rebound speed at the moment of its separation from the cam are obtained.
The analysis of the influence of the force of resistance of the needle movement in the race on the vertical speed of the needle is performed. The issue of the bounce of the heels of unselected needles from the lower edge of the inclined cam due to their inertial run-out was studied separately. It is established that at certain circular speeds of the needle cylinder leads to additional impacts of the needles with the horizontal limiting cams and increases their destruction.
The results of studies of the possible rebound of the needle heel from the inclined cam and the interaction of the needle with the limiting horizontal cams are a supplement to the method of calculating the loading of needles and are aimed at improving the accuracy of design longevity of needles.
Keywords: automatic half-hose machine, knitting needles, loading, impact, load cycle

References

1. Troshenko V.T. Soprotivlenie ustalosti metallov i splavov : spravochnik : [v 2 t. T. 1] / V.T. Troshenko, L.A. Sosnovskij. – K. : Naukova dumka, 1987. – 1315 s.
2. Konovalov L.V. Nagruzhennost, ustalost,  nadezhnost  detalej metallurgicheskih mashin / L.V. Konovalov. – Moskva : Metallurgiya, 1981. – 280 s.
3. Aven T. Improving the foundation and practice of reliability engineering / T. Aven // Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability. – 2017. – Volume 3. – 295–305. – URL : https://doi.org/10.1177/1748006X17699478
4. Abdulnaser M. Alshoaibi. Fatigue life and reliability assessment of metal structures / M. Alshoaibi Abdulnaser, Mohammed A. Ghazwani, Malek H. Hakami // Engineering Solid Mechanics. – 2021. – Volume 1. – R. 13–22. – URL : https://doi.org/10.5267/j.esm.2020.7.001
5. Berezin L.M. Otsinka dovhovichnosti ta nadiinosti viazalnykh mekhanizmiv panchishno-shkarpetkovykh avtomativ : monohrafiia / L.M. Berezin. – K. : KNUTD, 2013. – 191 s.
6. Reza M.H. A study on causes of knitting machine stoppages and their impact on fabric production / M.N. Reza, M.K. Hossain // European Scientific Journal. – – P. 262–269. – URL : https://eujournal.org/index.php/esj/article/view/6650
7. Nadiinist tekhniky. Analiz nadiinosti. Osnovni polozhennia : DSTU 2861- 94. – [Chynnyi vid 1996–01–01]. – Kyiv : Derzhspozhyvstandart Ukrainy, 1996. – 76 s. – (Natsionalnyi standart Ukrainy).
8. Raschety i ispytaniya na prochnost. Metody shematizacii sluchajnyh processovnagruzheniya elementov mashin i konstrukcij i statisticheskogo predstavleniya rezultatov : GOST 25.101-83. – [Data vvedeniya 1984-07-01]. – Moskva : Standartinform, 1983. – 29 s.
9. Kogaev V. P. Raschety detalej mashin i konstrukcij na prochnost i dolgovechnost : cpravochnik / V. P. Kogaev, N. A. Mahutov, A. P. Gusenkov. – Moskva : Mashinostroenie, 1985. – 224 s.
10. Berezin L. Estimation of Fatigue Longevity of Rod Elements of Complex Form / L. Berezin, M. Rubanka, A. Rubanka, Y. Kovalov, S. Pleshko // Periodica Polytechnica Mechanical Engineering. – 2021. – Volume 2. – R. 111–119, 2021. – URL : https://doi.org/10.3311/PPme.14647
11. Berezin L.N. Analiz vliyaniya dinamicheskih nagruzok na dolgovechnost vyazalnyh igl chulochno-nosochnyh avtomatov / L.N. Berezin // Vestnik vitebskogo gosudarstvennogo tehnologicheskogo universiteta. – 2015. – № 29. – S. 7–12.
12. Cimilli Duru S. Effect of yarn, machine and knitting process parameters on the dynamics of the circular knitting needle / S. Cimilli Duru, C. Candan, A. Mugan // Textile research journal – 2015. – Volume 6. – R. 568–589. – URL : https://doi.org/10.1177/0040517514547216
13. Amro M. Issledovanie nagruzhennosti mehanizma risunka chulochnyh avtomatov OZD / M. Amro, V.P. Voloshenko // Izv. vuzov. Tehnologiya leg. prom-sti. – 1981. – № 2. – C. 113–117.
14. Berezin L. M. Do rozrakhunku tsykliv navantazhennia holok panchishno-shkarpetochnykh avtomativ pry vyznachenni yikh nadiinosti za kryteriiem vtomlenisnoi mitsnosti / L. M. Berezin // Visnyk KNUTD. – 2010. – № 5. – S. 13–19.
15. Artobolevskij, I. I. Teoriya mehanizmov i mashin : uchebnik / I. I. Artobolevskij. – Moskva : Transportnaya kompaniya, 2016. – 639 s.
16. Pipa B.F. Ekspluatacionnaya nadezhnost mashin trikotazhnogo proizvodstva / B.F. Pipa, V.P. Voloshenko, S.T. Shipukov. – K. : Tehnika, 1977. – 136 s.
17. Moiseienko F.A. Proektuvannia viazalnykh mashyn / F.A. Moiseienko. – Kharkiv : Osnova, 1994. – 336 s.